 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
13/96 MTD ride on mower drive problem
Hello there, I have a n mtd 13/96 ride on mower which starts and runs fine but will not move either forwards or backwards .I have replaced both belts but no joy so far I am inclined to think that it is the double pulley that is at fault,as there is no means that I can see of adjusting the tension of the belts , it used to work fine then I came to it one day and no go ,the belts appear to be slipping and I get a burning rubber smell after a short time, any help appreciated
|
||||
Check out some similar questions!
Hi I have a MTD Lawnflite Ride on Mower with a Briggs and Stratton 11hp engine Type 252707. Its about a 1986 model. The cutting deck has been removed and I have stripped it down as a basic tractor for use in my garden It has been working perfectly but recently I have a problem where, when...
Hello I have a MTD ride on mower which came with the house I have just moved into It used to start and run okay, but now it seems to start and once a load is put on it seems to lose power after awhile and stop. Once it cools down it start s okay and the same thing happens again. Now...
Hi my names Kathryn, I am new to this site and hoping someone can help. I have an MTD Ride-on Mower that the blade driver belt has come off except for one bit that is still attached to the spring loaded pully. When I put the seriel and model number into the MTD site it is not recognised so I...
I have a Yard-man MTD ride-on mower T604H that is now stuck in the starting position. Even if I turn the key to the off position, it is still cracking trying to start the mover. It killed my battery and unless I unplug the battery it will never shut off. Can this be the ignition? I am about to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
