My home is 16 years old, I've had it for 5 years. I am on a pump - with 70LBS high cutoff and 55lbs Low turn on. All copper - I have 2 Delta 1600 shower faucets - one tub spicket with shower diverter - one shower only. The tub/shower combo has allways had only a trickle of cold water and...

I have just stared yet another period after just ending one 5 days ago. I had major pain with the last one, I have never had that kind of pain before. Now with this period I just found an extremely large blood clot. Although it looked more like tissue then an actual bllod clot. What could this be...

I am plumbing 2 showers that share a wall (back to back). In order to get the hot and cold supplies to the proper side of each valve requires lots of twists and turns. I was advised by someone to just use ½” male threaded connectors on the supply lines (sweat fit to copper) and then simply use...

If I use a interlocking plate to backfeed my main(homelite 200amp)from my generator... from my garage... can I use the braker that is feeding the garage if I put it in the proper place to accommodate the interlocking plate? It's a 220 30 amp braker... so part of the question is... will the...

I installed a wall in my basement that will have a vanity sink on one side and a wet bar sink on the other. If I run a hot water line to the vanity sink it is on the cold side of the wet bar sink. I will have the same issue on the cold water side. My question is can I just run one pipe for hot...