Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    jasonslater's Avatar
    jasonslater Posts: 1, Reputation: 1
    New Member
    		  
    #21

    Dec 4, 2010, 02:55 PM
    I was having the same issue with the flapper not staying up long enough. I checked the bottom of the flapper and the plug on the underside wasn't in correctly. I made sure there was no water in the flapper and put the plug in correctly. Now it works perfectly.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #22

    Dec 4, 2010, 03:08 PM

    And we thank you for the update Jason. Tom
    BGILTON's Avatar
    BGILTON Posts: 1, Reputation: 1
    New Member
    		  
    #23

    Dec 5, 2010, 09:45 AM
    I am not an expert and i think the solution has not been resolved. I bought a 3-pack of korky flappers. One of the 3 worked. The other two dropped early and one leaked. I don't know what the solution is. I have been trying to figure out the reason for some time baring in mind the above mentioned solutions. Thanks, brad gilton
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet Flapper ! [ 11 Answers ]

Okay... my father decided to fix the toilets one day for a variety of reasons I won't go into right now... BUT ever since THEY HAVEN'T BEEN RIGHT!! Wish he'd leave my HOUSE ALONE!! Anyway, I digress... The FLAPPER on the 2 toilets aren't working properly. When you flush they stay up for just about...

Flapper arm [ 19 Answers ]

It seems like the flapper arm is sticking up but I can't figure out why. Also I notice my toilet is flushing twice, what to do about that. Thanks a lot guys

Toilet Flapper Won't Drop [ 2 Answers ]

When flushed, my toilet flapper immediately raises to a 45 degree angle, but then it will not drop completely unless the handle outside the tank is pulled up (jiggling does not solve it). It drops partially, but then the chain is tight and it is does not drop further. Once you pull up the handle,...

Flapper will not close properly [ 5 Answers ]

:confused: Hi, it appears that there is a lot of good plumbing advice here. Here's my problem. I have had problems with the flush valve on my 3.5 gallon one-piece Crane toilet for about the past month. I have replaced the old flapper, a white plastic frame with a cup on one end and a flapper on...

Flapper closes to soon [ 4 Answers ]

I have a low flush toilet that has a problem. When you flush it instead of pushing the handle down and walking away you have to stand there and wait for the water to drain. I took the tank top off and looked in side. This is the kind of toilet that has the floater that is a cylinder on the input...

View more questions Search