Ask Experts Questions for FREE Help !
Ask
    areef_aleie's Avatar
    areef_aleie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 21, 2003, 06:56 AM
    Backup
    I have Server Dell 4400 power edge OS: NT 4 Server with Service Pack 6
    Tape Drive: Compaq DLT7000 External
    Backup Software: Arc Serve 2000

    When I take the backup, it starts successfully and after finishing the
    First tape it asks for the second tape to continue, when we insert second
    Tape. After a while, it gives me hardware error. And fails the backup. I
    Have following different error numbers.

    E6300 WIN NT SCSI Port Error
    heliotrope's Avatar
    heliotrope Posts: 57, Reputation: 3
    Junior Member
    		  
    #2

    Jun 23, 2003, 05:51 PM
    Backup
    Hi:

    I know nothing about tape back-ups, or Arc Serve, but I did a search on Google and found the following discussions of problems, similar to yours.

    [list]ARC Serve document
    Tek Tips - Arc Serve discussion
    Computer Associates-Technical Support (they manufacture ARC Serve)

    Hopefully, this will be of some help.

    Rose
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sewage backup [ 5 Answers ]

Hi My basement has flooded 2 times with sewage in the past 5 weeks. Two different plumbing companies cannot determine the problem. Is it possible that the duct tape we put over our spare bathroom's shower stall (we're remodeling and didn't want debris to go down) floor drain 6 weeks ago could...

Basement backup [ 1 Answers ]

Hello, Our house in Wisconsin was built in the late 20's and does not have drain tile or a sump pump. After most large rainfalls we get water coming up from cracks in the floor. We will probably be putting in tiles and a pump because that alone is a huge pain. After this last large...

Water Backup [ 1 Answers ]

Recently I replaced the original elbow (40+ yrs old) on my upstairs sink because the plug had rusted out. After doing so the sink worked great - unfortunately the next day when the upstairs shower or the kitchen sink was used it backs up into the main floor bathtub. I have tried plunging while...

Washer Backup! [ 2 Answers ]

Hey Everyone I Am New To The Site Because I Have A Big Problem! I Live In The Country Where I Have Septic Tank And The Water Drains Into A Pipe Underground That Eventually Goes To A Field Tile. I Recentely Installed A New Washer And Dryer And Did All The Hookups Myself. The Dryer Is Working...

View more questions Search