Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fiberglass shower drain removal
[ 1 Answers ]
All we wanted to do is change our drain from brass to chrome in our fiber glass shower and I'm afaid we have bitten off more than we can chew. The brass drain is glued in with a 2" piece of pvc pipe sticking up in the center. How can we remove the brass drain wtihout damaging the shower or going...
Shower Drain Installation
[ 3 Answers ]
As part of a remodeling effort, we are having a tiled shower built in our guest bathroom. We had a plumber come out to run the water and drain lines. He installed the drain. Last night I noticed that the hole he cut in the plywood sub flooring is quite a bit larger than the drain, so that...
Installing a drain in a fiberglass shower
[ 1 Answers ]
I’m in the process of installing a fiberglass shower unit in a new basement bathroom, but am somewhat stumped regarding how to attach the drain to the shower and then to the PVC pipe. The floor is concrete and I have 2” PVC rough in for the shower. Once I cut the PVC to the correct height, and...
Fiberglass shower drain leak
[ 3 Answers ]
I have a fiberglass shower leak drain leak. It is caused by the fiberglass cracking around the drain. I need to confirm my process for fixing this problem. 1. Remove old drain. It is a metal with a nut on the bottom. Can't unscrew it because the drain is so loose that it turns in the drain...
Shower drain installation
[ 2 Answers ]
Hi I'm installing a new shower base that came with a self caulking drain (has a rubber caulking ring that tightens round the 2" waste pipe). When the shower base is in position the drain is ever so slightly off center and I can't get the rubber ring over the waste pipe. The drain is set in... View more questions Search
|