 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pressure tank instulation
We have installed a new water tank at the well. THe pressure gage will not turn off. We get the water okay but the tank keeps running. It doesn't fill up the tank. It is a Lowe's welll saver 36 gal tank with a air bladder. Can you help? We are in ga and my husband has been changing the system out all day and now it is getting dark and we need help. Thank you thank you louise
|
||||
|
||||
|
Hi Louise,
Sorry to wait until morning to answer. Please explain, "THe pressure gage will not turn off". Are you referring to the pump control box that won't shut the pump down? Have you adjusted the bladder tank to your system yet? When you say,"the tank keeps running" do you mean the pump won't stop, or the tank won't stop leaking? Please give us more details and if we need to get together on terms so we can understand one another let's do it now. Back to you. Tom |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Well, I have asked some questions about my plumbing before. So I am calling on you guys once again. I have a 52 gallon pressure tank/bladder tank made by wellsaver. I turn the water on and have good pressure for a few minutes then it basically goes dead with no pressure. I recently posted questions...
I bought a new home and the builder had installed a 20 gal pressure tank. I have a jet pump system where the motor sits directly on the tank itself. I really notice the pump running a bit,but also notice the loss of pressure quickly, especially in the shower. Now I was thinking of buying a much...
My well tank is building pressure to the point where the pressure release valve continually leaks water. I tried emptying the tank and restarting. As soon as I did this the tank built pressure to over 90 and the pressure release valve again began leaking a lot of water. Any ideas? Thanks,...
I am trying to increase my water system pressure to the minimum required 40 PSI to feed my reverse osmosis drinking water filter. However, the 33 gallon pressure tank for my well pump system says it is pre-charged at 30 PSI and that the cut in pressure for my pump should be set equal to that 30...
I recently had my well pump replaced. Ever since, the pump kicks in after a gallon or two of water use. I called the well pump installer immediately when we noticed the problem (which did not exist until he came out to replace the pump), but he won't show up to check it out. Kidnapping him and...
View more questions Search
|
