Ask Experts Questions for FREE Help !
Ask
    camaro36's Avatar
    camaro36 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 30, 2007, 05:32 PM
    Kenmore dryer
    I have a kenmore 60 series that won't heat up
    Have checked to see if the air flow is blowing
    Seems fine , Do you think this might be a heating element
    Will the air dry on this unit dry the clothes as well.
    Never used it before,If so where is the element
    Located.. Is it difficult to change ?

    Thank you

    Dallas
    RalphS's Avatar
    RalphS Posts: 120, Reputation: 12
    Junior Member
    		  
    #2

    Apr 30, 2007, 10:30 PM
    Quote Originally Posted by camaro36
    I have a kenmore 60 series that wont heat up
    Have checked to see if the air flow is blowing
    seems fine , Do you think this might be a heating element
    will the air dry on this unit dry the clothes as well.
    never used it before,If so where is the element
    located ..Is it difficult to change ?

    Thank you

    Dallas
    Usually, the heating element is NOT the most likely part that goes bad. Start checking the thermo-fuse and while you're back there also check the thermostats and if they are good then check the element with an ohm-meter. All dryers need good air-flow to dry the clothes but you need heat as well.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer [ 5 Answers ]

Opened the door took out dryed clothes, put in more, closed door and nothing -- won't run at all

Kenmore dryer [ 1 Answers ]

I have a simple question--I know that my dryer relay on my kemore dryer is bad--however I have no idea where it is? Model number 11060932990--part 2 this is the second time in 2 years that is has gone bad any reason why? My dryer vents to the outside about 3-4 feet--new construction home?

Kenmore Dryer [ 1 Answers ]

Please help! I have a Kenmore He3 electric dryer. I shut the door and the light in the back went out. I can't find my book to see what the light bulb part number is. Now the Dryer will not start. I can push the button and the time will come on the screen, but when I hit start, it just beeps. ...

View more questions Search