Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can I ground my generator to a copper rod driven into the ground with coax cable?
[ 2 Answers ]
I am going to test my 6000 watt generator. It is recommended that I ground it to a copper rod driven into the ground. I alread have a copper rod that is used to ground my telephone and cable lines. Can I use a length of coax cable to run from my generator ground to the copper rod?
What size ground wire do I need for a 10 mega-Hertz ground 400 feet long?
[ 1 Answers ]
We are adding a new ground that is 400 feet away, and we need to size it for 10 mega-Hertz. Can you please tell me the size cable that we need to install?
Can a receptacle ground be attached to white nuetral terminal for ground?
[ 1 Answers ]
I have older house. The receptacle showed "open ground." I connected a wire from the green ground terminal to the nuetral terminal, and the meter read "correct." I left it that way because everything worked. Is it safe?
Correct method to RUN copper ground wire to ground a 200 amp electrical circuit box?
[ 0 Answers ]
Is a 3-wire copper ground or a solid copper wire required to ground a 200 amp electrical box? Is this wireing correct: A 3-wire copper ground wire in a conduit run from the electrical panel to the copper rod in the ground then to the cold water; AND THEN IN THE GARAGE the naked 3-wire... View more questions Search
|