Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Running two 100 amp main panels from a 200 amp service
[ 27 Answers ]
Greetings! I live in a rural country area. The electric company will be installing a pole, meter, and 200amp service with disconnect at pole. (It will require 50 foot run of service cable from pole to main load center in mobile). Currently the double wide has a General Electric 100amp Main...
200 amp panel feeding a 100 amp panel roughly 130' away
[ 7 Answers ]
Hi all, We are building a apartment above the garage,my question is what size wire do I need to run from the 200 amp panel to the 100 amp panel roughly 130' away? I want to use aluminum wire as I think copper would be to costly. Thanks for your help in advance, Dude :eek:
Running 100 amp service panal 200 ft away from main 200 amp service
[ 4 Answers ]
I am looking to find out how big the wire needs to be to carry the load. This will be a 100 amp service coming from a 200 amp main . It will need to travel 200 to 250 ft underground to a barn. If some one could help me that would be great thaxs)))
200 Amp Service Panel with 60 Amp Main Breakers
[ 26 Answers ]
I was told when we purchased our house that it had 200 Amp service which it appears to be; however, the top of each bus bars only has 60 Amp breakers for the Main shut offs. Is this normal? Each bus bar is connected to a hot wire (one red and one black) and then the two 60 amp breakers are...
100 amp service vs. 200 amp service
[ 5 Answers ]
The house I just bought was built in 1952. It's a 3 bedroom, 1 bathroom with the standard screw in fuses (total amps unknown). Presently I'm doing a remodel. Adding a third bedroom & extra bathroom, washer & dryer, dishwasher, newer & larger refrigerator, bigger microwwave, probably 3 window air... View more questions Search
|