Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring two switches one power source
[ 3 Answers ]
I have a single light that is controlled by a regular switch and a dimmer switch and I have another regular switch that gets it's power from the dimmer switch in the same box. Here is my dilemma the box where I'm installing the light has a red wire,a white wire and two black wires now the light...
Wiring Light with Power Source in Middle
[ 1 Answers ]
I have a light box on a post that I have to feed power to but the electrical source is in the middle of the run and the switch is at other end going up steps. I was going to hook the white from light to white at power source, black from light to white from switch with a piece of black tape on it...
Wiring multiple switches and one recept to one power source
[ 1 Answers ]
Need to wire two separate sp switches and one recept to a single hot?
Wiring switch and gfi with one power source in
[ 1 Answers ]
I need to make one ground fault outlet and one switch to a vainity light using one powersource. The power source comes into the switch box as well as wiring from the gfi box and the wire from the vanity light. I created two pig tails off the power source hot (black wire), one is connnected to the...
Electrical power source in house wiring
[ 1 Answers ]
How do you determine if the power source is coming to a ceiling fixture then to the wall switch or vise-a-versa. View more questions Search
|