Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Lighting/starting problem. Help?!
[ 1 Answers ]
I have a 98 harley softail springer fxsts, I recently put a wiring extension on to accustom my new mini apes.. I wired them correctly and matched up all the wires and connected everything back where it needed to go/was before hand.. and I put everything back together and went to start it up and my...
Problem with Recess Lights
[ 3 Answers ]
My costumer have a problem, the light bulbs in a resseset can start kliking after Short time of work. The max W is 75w we used 65w and still kliking, I moved the insulation from the and around the can, I checked the contact in the sucket,and I used switch not dimmer. Still kliking. Any one can...
Ceiling fan and recess lighting
[ 0 Answers ]
I had a ceiling fan that had a light as well as recess lighting in the same room.. There is a switch on the wall with two slides.. One that says fan and one that says light. The fan one controlled the fan and the light side controlled the ceiling fan light as well as the room recess lights. I...
Recess lighting
[ 1 Answers ]
I want to install 6 recess cans in my bed room its 20x20, I want to use 65 watt blubs,can I use 2 3way dimmers to turn on-off? Will it be too much of a load ? Will 14/2 wire be OK? My ceiling light is on 2 3way switches now.
Q's About Compact Fluorescent Recess Lighting
[ 9 Answers ]
I have a couple q's about some of the compact fluorescent recess lights I've been looking at from Halo. I'm planing out some lighting for the front of my garage and I will be using these in the soffits in front of the garage door for accent lighting/wall wash. I'm curious what the difference is... View more questions Search
|