Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replaced the whole gas valve assembly, and still no gas to pilot valve.
[ 2 Answers ]
I replaced the whole gas valve assembly. Checked the voltage according to the print. But I still can't get gas from the pilot valve. The model is 394gaz048I50
What is the difference between Symmons TA-25A and TA-25B diverter spindle?
[ 1 Answers ]
My problem is not enough hot water mix, even though the anti scaled adjustment is set to full hot. This diverter is within a tub spout shower mixer valve. What is the difference between Symmons TA-25A and TA-25B diverter spindle?
I have replaced my gerber shower diverter valve and seat, but it keeps leaking. What
[ 0 Answers ]
My Gerber shower diverter vale stem broke and I have replaced it and the seat as well, but it is now leaking. What can I do to fix it?
Symmons valve spindle replacement?
[ 1 Answers ]
My symmons temptrol valve does not let hot water through. Actually it is just a dribble when put to all hot. I removed the spindle & seat then cleaned them but it was not much of an improvement. Should I just replace these parts?
Symmons shower diverter spindle
[ 0 Answers ]
Hi,I have just replaced my Symmons shower diverter spindle again(TA-25A)because of a leak and now have a new problem. I have to replace this diverter spindle every year or so because the plastic on the end by the o-ring cracks and it leaks water down through the first floor ceiling.The problem now... View more questions Search
|