Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Insulation over knob and tube?
[ 2 Answers ]
Can you spray cellulose insulation over knob and tube wiring in a attic
Compressed blown cellulose versus less cellulose in attic?
[ 1 Answers ]
I built a box frame above my ceiling joists for future attic flooring to be added after cellulose was to be blown in. Everything was going smooth, until the cellulose blowers blew 6 inches of the cellulose above the frame! So, here is my question: should I move the excess blown cellulose to the...
Knob & tube
[ 6 Answers ]
I have an old house (1865) and it has knob & tube wiring. I have a fluorescent kitchen light with an older flip switch which goes up or down. It is a three way, with a switch on each side of the kitchen, and I have to flip the switch several times for it to come on. My question is can this be...
Knob & Tube
[ 1 Answers ]
I am currently remodeling my bathroom. Home built in the 50's with existing knob and tube. Bathroom has power coming into 1 switch that controls lighted medicine cabinet with outlet inside cabinet. Want to add 1 new light fixture, 1 GFI, and 1 ceiling fan (no light). Is there any diagram that...
Knob and Tube tie-in
[ 13 Answers ]
I apologize if I missed this info elsewhere. I have an 80 YO bungelow with seemingly healthy knob and tube wiring. The house has a combination of old and new wiring depending on when past work was done. My question is what is the safest, code friendly or preferred way to mate the old K&T to new... View more questions Search
|