Ask Experts Questions for FREE Help !
Ask
    Grandpax2's Avatar
    Grandpax2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 12, 2017, 03:33 PM
    Mastercraft ceiling fan
    There is no AC present at blue and white fan light connections. Any help would be appreciated.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Aug 12, 2017, 05:56 PM
    Was the fan working properly before or is this a new installation?

    How is the light supposed to be controlled:

    Wall switch, pull switch on the fan or a remote unit?

    Can you help us please.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Aug 12, 2017, 08:27 PM
    Depends how the house wiring is arranged. Do you have 1 or 2 wall switches? If 1 switch, the blue connects to, most likely, a black wire in the ceiling box. With 2 switches, blue goes to red. If you drop the ceiling cover for the fan you should see how they are connected.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter ceiling fan adding remote control, extra ceiling wire. [ 1 Answers ]

I am adding a Hunter remote control to my exsisting Hunter ceiling fan. All the wires match from the remote to the fan, and I've hooked them up perfectly. My confusion comes from the ceiling wires to the remote. My ceiling has 3 wires: white, grey and red. The remote only has two wires to hook them...

Thermostat for Mastercraft Electric Garage Heater [ 0 Answers ]

I bought a Mastercraft electric ceiling garage heater.It is 240v 5000watt.I live in Moose Jaw sk. And am trying to find a thermostat for this.Wall mount thermostat.And suggestions?

Brigs And Straton 15.5 Mastercraft Lawnmower [ 3 Answers ]

Problem with this lawnmower, clutch pedal will not come out after engaged, can't even pull it back, any suggestions as to what the cause of this is, would it be a rod off or something like that, thanks,

Mastercraft snowblower not starts after transported [ 33 Answers ]

Happy New Year everybody! I just bought a second hand mastercraft snowblower, it worked all fine when I tested it with the seller. Unfortunately, I transported the snowblower by put it side sit in my SUV rather than upritht. After arrived home, I noticed all oil were leaked out, I just added...

Mastercraft lawntractor woes [ 1 Answers ]

Hello I have a 15.5 hp mastercraft lawn tractor I just took it out of storage run it awhile and started to drive (after fresh gas etc) it has a hydrostatic transmission it worked fine for 10 minutes then started to labor hard as I push forward or reverse on the speed stick it forces back on it (now...

View more questions Search