Ask Experts Questions for FREE Help !
Ask
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #1

    Jul 13, 2017, 10:17 AM
    Tools
    To cut chain link mesh. Which one is the best.

    1. 18 Inch Bolt Cutters $11.99

    2. 24 Inch Bolt Cutter $15.99
    smoothy's Avatar
    smoothy Posts: 25,492, Reputation: 2853
    Uber Member
    		  
    #2

    Jul 13, 2017, 10:23 AM
    Either will work... you will have more leverage with the 24 inch assuming the head isn't too big to fit between the links. 18" is easier to handle and smaller and lighter but requires a little more effort.

    With chain link, what you are cutting isn't too thick so both will be easy...you can cut more with the 24"...like padlocks you lost the key to or heavier stuff like chain, etc.
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #3

    Jul 13, 2017, 10:53 AM
    Thanks again
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Best UI tools [ 1 Answers ]

Which ar ethe best UI tools to make a perfect design?

Plumbing tools calking tools for lead (new)to buy? [ 2 Answers ]

'must have' tools [ 11 Answers ]

So all you do-it-your-selfers out there, my question is what would you say is your 'must have' tool, the one you would not do without? With Christmas coming up I thought this might be a very helpful thread to start. Thanks.:)

Big Rig Tools [ 2 Answers ]

I have seen a tool that applies pressure to the Sliding Axle Release Pin Lever so that a driver may slide the tandem axles on a trailer buy without others help in difficult situations. It had a spring within the tool (to apply pressure to the pulling lever) and a magnet at one end to hold it to the...

View more questions Search