Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
220 outlet in my garage
[ 3 Answers ]
I hope this helps, the breaker is a double 40 it has 4 wires 3 of which are about 3/8 inch in diameter or so ,sorry unsure what gauge. And the bare ground wire. Note: nothing else on that breaker. The outlet is a 30 amp 125/250 volt4 hole. Again I would like to change this to a 3 wire plug to...
220 4 wire outlet in my garage
[ 1 Answers ]
I have a 220 4 wire outlet in my garage that I want to change to a 3 wire 220 outlet to power a welder. How do I do this?
220 4 wire outlet in my garage
[ 1 Answers ]
I have a 220 4 wire outlet in my garage that I want to change to a 3 wire 220 outlet to power a welder. How do I do this?
How to run 220 when all I have is 110?
[ 5 Answers ]
Central A/C unit went out so I purchased a large window unit to cool a combined open living - dining - kitchen floor plan only to discover that the plug is 220. And of course I have no 220 outlet where I need to put the window unit. I'm assuming that the outlet will need to be replaced in order...
Adding 220 to garage and motor markings
[ 2 Answers ]
Hello, I have a question about adding 220 to my garage and also some markings on a motor for a metal lathe that will be in there. I have a lathe that is marked on the motor with 115/230 for volts, 60 cyc, phase 1, Amp 37/18.5... from what I gather this might mean it can run on 110 or 220? I'm... View more questions Search
|