Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How we make thin base in comman base configuration of npn transister and why?
[ 0 Answers ]
When I was in my classroom,my teacher told me when she was discussing on the topic about bi polar junction diode that in common base configuration we make the base thin.but when I asked him why then she could not satisfied me.so tell me more about it..
Dry laid Flagstone: sub-base only, or sub-base and base?
[ 1 Answers ]
Hi, I live in Northern VA and am installing dry laid 1.5" natural cleft flagstone on 4" of bluestone sub-base. I'd like this 500 sq ft. patio to last 20 years or more. My question: Is it overkill to add 2" of stonedust as a base on top of the bluestone sub-base, or is this unnecessary? If my...
Replacing Leaking Shower Stall Concrete Base
[ 8 Answers ]
In my basement I have an old shower stall that was installed by the former owner. The stall also has the air conditioner drainage hose directed through the bottom of shower stall and it drains into the shower drain. That is not my idea of sanitary! Also, there is no top (cover) over the stall. ...
Replacing tile shower base
[ 3 Answers ]
I have a shower that is tiled, and the base is cracked and leaking, and needs to be replaced. I would love to put a one piece base in, but the shower is an odd size, and to get one custom made is out of my price range. Not sure what to do- replace the old tile with new tile(never done tile work...
Replacing neo angle shower base
[ 1 Answers ]
I am replaceing a neo angle shower base in my basement. How does the base/shower drain come off the pipe? Is the drain cemented/glued to the pipe? If so, how would I cut it? Could it possibly be some sort of compression nut? Thank you! Robby View more questions Search
|