Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to remove light bulb from loose socket in ceiling fixture
[ 5 Answers ]
The bulb burned out and when I tried to replace it I found it was stuck. So I used just a little elbow grease, and the socket came loose. So now it all turns round and round, and the bulb still doesn't come out. I don't want to twist the dratted wires off. And I can't grip the socket, because...
Put a bulb converter on light bulb for fan light and now the light doesn't work
[ 1 Answers ]
I put a light bulb converter on a ceiling fan light to get more light and now it doesn't work. Fan works fine
The cost of electric power is 10 cents/kwh using a 300 watts light bulb and two 150 w
[ 0 Answers ]
The cost of electric power is 10 cents/kwh using a 300 watts light bulb and two 150 watts television sets. The light bulb operates at an average of 10 hours/day and the 2 television sets operates at an average of 5 hours/day. What will be your electric bill in 1 month.
Correct voltage in light bulb socket, but bulb(s) won't light
[ 1 Answers ]
Regarding a 4-light kit on a residential ceiling fan (Hampton Bay). 20 A circuit, nothing else on in circuit (house is vacant). No wall switch; all switching done at fan/light kit (separate pull chains). Fan turns fine. 122 VAC as measured w/ a Fluke meter within light bulb socket. Have...
When using a 3 way bulb in a standard light socket, which wattage lights up?
[ 2 Answers ]
When using a 3 way bulb in a standard light socket, which wattage lights up? Lets say you screw in a 50-100-150watt 3 way bulb in a standard on/off lamp, which wattage will turn on when you turn on the lamp. What happens if you put a 3 way bulb into a non-switched lamp, planning to use a foot... View more questions Search
|