Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kohler Shower Valve -- one handle
[ 0 Answers ]
The chrome sleeve won't budge.I thought I could just leave it and remove the entire valve. When I removed the two screws holding the actual valve to the part in the wall the valve won't come off in fact doesn't budge?? I think its Kohler as that is what the trim pieces say. I bought the Kohler...
How to remove handle on shower valve?
[ 1 Answers ]
I have tried rocking the handle to remove it with no luck. I tried pliers did not work. I tried putting a screwdriver into the head and hitting with a rubber mallet but the handle won't budge. I even gave it a shot of WD40 . Any other suggestions greatly appreciated - I hate to have to call a...
Stuck middle valve - 3 handle shower valve
[ 3 Answers ]
Help and suggestions!! The middle handle, used to divert water from the tub spout to shower head is stuck in the 'tub' position. I have removed the handle and trim bezel and tried to turn the shaft with pliers - no luck & quit before marring the splines on the brass shaft. What now??
Installing a single handle shower valve
[ 1 Answers ]
I am installing a new shower valve (new construction) using PEX tubing, the tubing won't support the valve and the valve has no mounting tabs. What is the best way to anchor the valve body?
One handle shower valve
[ 4 Answers ]
I have a Kohler one handle shower valve that does not permit me to get hot enough water. Water heat is OK and hot water is available in other bathrooms. How do I change the valve to get hotter water. Admiral View more questions Search
|