Ask Experts Questions for FREE Help !
Ask
    plumbercrak's Avatar
    plumbercrak Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 30, 2016, 11:29 AM
    How to I attach a fitting on a straight 7/16" OD tube
    The 2 burner grill I purchased has a straight supply line extending out the rear of unit. The stock connection is rubber hose and a hose clamp. I want to attach a fitting to the tube to use a tee to split the supply to 2 appliances not just the burners. What is my best option?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jul 30, 2016, 12:29 PM
    Any chance of a picture? What material is that straight supply line? Rubber hose is not used for a gas grill.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Jul 30, 2016, 12:39 PM
    Is that gas outlet on BBQ threaded ?
    What is that "tube" made of ?
    Size of that tube ?

    Picture would help

    Back to you

    Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What fitting do I need to attach to a 1" 20LT bushing where the meter attaches? [ 1 Answers ]

I have a gauge, but what fitting do I need to attach to a 1" 20LT bushing where the meter attaches? a regular 1" union does not work.

NPT Fitting connection to Flare Fitting? [ 2 Answers ]

I am replacing the propane Cook-Top, 4 burner in my boats' galley (location USA) with a new one made in Italy. The new one has a Compression Female fitting on the propane input, and a adapter 90 degree elbow Male Compression/Male NPT fitting that came with the stove. I bought a 20ft. Propane 3/8...

Where does the black tube attach to the faucet on the watts premier ro water system [ 2 Answers ]

I am installing a watts premier model WP-4V ro system. I can't find which hoses attach to where on the faucet. Does anyone have any idea? There is a red 3/8"hose and two 1/4"hoses. One is black and one is blue. Thank you for the help.

1/2" flexible supply hose won't attach to 1/2" OLD brass sink fitting [ 2 Answers ]

Hi, I am trying to install shutoff valves below an old sink (house built 1926 in Buffalo, NY). The old water supply had a 3/8" FIP connection on the bottom and what looked to be a 1/2" compression connection on the top. A local plumbing store that specializes in old plumbing also thought that a...

View more questions Search