Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Which dies faster? Blinking led or continuous led?
[ 1 Answers ]
Question is as above, which dies faster? (in terms of life span) blinking led or continuous led? If same led light was being used. (these are low powered red+green=orange led meant to show activeness of a computer without screen, which will have longer life is needed)
I have a rheem heat pump with led 1 on and led 2 off. The code list says press set.
[ 2 Answers ]
In the heat pump unit there are 2 leds. Led 1 is on and led 2 is off. The diagnostic chart says press set. What does that mean. There is no reset button.
White rodgers 50a50-241 led dead... no light on led, nothing works
[ 0 Answers ]
Is led light supposed to stay on all the time? Mine comes on for 1 second and then goes off (blank) the transformer is powered up (27vac) but control panel and thermostat are dead. Led on controller is out, and thermostat display is blank. Do I have a bad controller? Is there any LED blink for...
My Lennox G40UH (X) Does Not Have Hot Air => 1st LED Flashes, 2nd LED Is On
[ 3 Answers ]
Hello All Brothers, we really, really need your help. Our family live without heater almost a week. We both lost our jobs that is why we must wait until today. Here is the problem: Based on the diagnostic codes, 1st LED flashes, 2nd LED is On => Primary or secondary limit switches open. Here...
Goodman GMH8 heating unit - LED Led flash 4 times
[ 4 Answers ]
Hi, I have just recently bought a Goodman GMH81155CNAG gas heating furnace. I find the manual is very unhelpful as far as diagrams and explanatory. The problem that I am having is when I closed the doors for the furnace, the heat would stop and only the blower running. The LED would flash... View more questions Search
|