Ask Experts Questions for FREE Help !
Ask
    billyjklm's Avatar
    billyjklm Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 30, 2016, 04:42 AM
    2013 Honda Accord rear lower control arm bolt torque
    What is the torque setting for the rear lower control arm bolt on a Honda Accord 2013?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Apr 30, 2016, 04:47 PM
    40 lb.-ft.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2004 Honda Accord EX Control Arm Replacement [ 0 Answers ]

I have a 2004 Honda Accord Ex with damage to the rear passenger wheel. All 4 control arms are bent. I have installed all new Honda OEM arms and wheel is still not alighned perfect. I did not realaize I needed to mark on of the control arms so the bolt goes on the correct way. I believe I have it...

How to install lower control arm on 2003 ford taurus? [ 1 Answers ]

How to install lower control arm on ford taurus,what do I remove first.

Change rear brake pads 03 Honda Accord [ 1 Answers ]

How do I change the brake pads on my 2003 Honda Accord

2000 Honda Accord Alarm does not arm [ 1 Answers ]

Hello I have 2000 Honda Accord EX 4dr 4cyl The problem I am having is that when I lock the doors, the buttons lock, however the alarm does not arm. The horn is supposed to beep, lights flash, and the led on the drivers door should blink. This is what happened for all the years that I had the car....

Lower ball joint/control arm [ 1 Answers ]

I have a 2002 c230 Mercedes and was told by the dealer I need to have the right lower ball joint/control arm replaced. I have 150,000 miles on my car. Need new front brake pads and rear pads and rotors. But have no noise or shaking when braking. What do you think? Second opinion?


View more questions Search