Ask Experts Questions for FREE Help !
Ask
    Socalstarter's Avatar
    Socalstarter Posts: 65, Reputation: 1
    Junior Member
    		  
    #1

    Apr 28, 2016, 09:59 AM
    Clutch problems
    Hello every one. I got a 94 accord with clutch problems which I am trying to fix. I can't engage 1st and 2nd speeds all the other ones engage just perfect. Also when I push in the clutch to start the car it does start but as soon as I release the pedal the car dies. Any suggestions where to start working. I know both issues are related each other. Any help guys
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Apr 29, 2016, 07:24 PM
    Check adjustment of Clutch Switch A and Clutch Switch B. Ensure the clutch pedal pads are intact and have not disentegrated.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Clutch problems [ 0 Answers ]

I recently installed a new clutch on a john deere 4010. It won't shift. Does it have to be adjusted? I was instructed to bolt right in and away I go. Help

Clutch problems [ 3 Answers ]

My 2004 Honda civic clutch won't engage in all gears. Stick shift feels loose fluid levels are OK car was working fine this morning

94 ford escort 1.9l clutch problems [ 18 Answers ]

Several months ago the clutch was replaced, and it has been driving fine ever since yesterday when the car did not want to go into any gear, I turned it off and back on and it went in to all the gears for like 30 seconds, then once I shifted out it would not go back in, what is most likely the...

Problems with my clutch [ 2 Answers ]

I am hearing what seems to be my throw out bearing and the transmission is hard to put in gear. Could it be the throw out bearing or the slave cylinder? Or the throw out bearing holder?

View more questions Search