[siju]

hi folks:-

I am having a samtron 56V monitor.recently I adjusted the screen settings
using the active menu or O.S.D now what happens is that every time I start the
computer the active menu or osd appears. Ist screen will be
control lock locked. Then the menu control lock un locked will come.
after screen settings menu will come. Now this menu is not going even after I press
exit key on the monitor.

I consulted their manual:-

their websites are as follows:-
http://www.samsung-monitor.com/(worldwide)
http://www.samsungusa.com/monitor/(USA)


under the trouble shooting section

I found the following entry

screen is out of focus or osd cannot be adjusted.

remedy:-
adjust the resolution and frequency at the video card

they have given the following settings:-

vesa,800 X 600

horizontal frequency(khz):- 53.674
vertical frequency(hz) :- 85.061
pixel clock(mhz) :- 56.250
sync polarity(H/V) :- +/+

now where can I find these settings I could not find it.
please note I am not a experienced computer user so any help would be appreciated.

following is the report generated by everest the bench marking software:-

--------[ EVEREST Home Edition (c) 2003, 2004 Lavalys, Inc. ]-----------------------------------------------------------

Version EVEREST v1.51.195
Homepage http://www.lavalys.com/
Report Type Quick Report
Computer J0J7I4
Generator zodiac
Operating System Microsoft Windows 98 SE 4.10.2222A (Win98 SE)
Date 2005-03-08
Time 12:54


--------[ Windows Video ]-----------------------------------------------------------------------------------------------

[ Intel(R) 82845G/GL Graphics Controller ]

Video Adapter Properties:
Device Description Intel(R) 82845G/GL Graphics Controller
Installed Drivers ialmdrv.drv

Video Adapter Manufacturer:
Company Name Intel Corporation
Product Information http://www.intel.com/products/browse/chipsets.htm
Driver Download http://support.intel.com/support/graphics


--------[ PCI / AGP Video ]---------------------------------------------------------------------------------------------

Intel Extreme Graphics Video Adapter
Intel Extreme Graphics 3D Accelerator


--------[ Monitor ]-----------------------------------------------------------------------------------------------------

[ Samsung SyncMaster 501s/551s/551v/MagicSyncMaster CM151A ]

Monitor Properties:
Monitor Name Samsung SyncMaster 501s/551s/551v/MagicSyncMaster CM151A
Monitor ID SAM0025
Model SyncMaster
Monitor Type 15" CRT
Manufacture Date Week 49 / 2002
Serial Number HHATC00891
Max. Visible Display Size 28 cm x 21 cm (13.8")
Picture Aspect Ratio 4:3
Horizontal Frequency 30 - 55 kHz
Vertical Frequency 50 - 120 Hz
Maximum Resolution 1152 x 864
Gamma 1.80
DPMS Mode Support Active-Off

Supported Video Modes:
640 x 480 105 Hz
800 x 600 85 Hz
1024 x 768 65 Hz
1152 x 864 60 Hz

Monitor Manufacturer:
Company Name Samsung
Product Information http://www.samsung.com/Products/Monitor/index.htm
Driver Download http://www.samsung.com/Products/Moni...iver/index.htm


--------[ Desktop ]-----------------------------------------------------------------------------------------------------

Desktop Properties:
Device Technology Raster Display
Resolution 800 x 600
Color Depth 16-bit
Color Planes 1
Font Resolution 96 dpi
Pixel Width / Height 36 / 36
Pixel Diagonal 51
Vertical Refresh Rate Default

Desktop Effects:
Combo-Box Animation Enabled
Drop Shadow Effect Disabled
Flat Menu Effect Disabled
Font Smoothing Disabled
Full Window Dragging Disabled
Gradient Window Title Bars Enabled
Hide Menu Access Keys Disabled
Hot Tracking Effect Enabled
Icon Title Wrapping Enabled
List-Box Smooth Scrolling Enabled
Menu Animation Enabled
Menu Fade Effect Disabled
Minimize/Restore Animation Enabled
Mouse Cursor Shadow Disabled
Selection Fade Effect Disabled
ShowSounds Accessibility Feature Disabled
ToolTip Animation Disabled
ToolTip Fade Effect Disabled
Windows Plus! Extension Enabled

Problems & Suggestions:
Problem Some applications may run better in 32-bit color mode.


--------[ Multi-Monitor ]-----------------------------------------------------------------------------------------------

\\.\Display1 Yes (0,0) (800,600)

[fredg]

Hi,
I also use Win98SE.
To find the screen settings, and the Display Adapter,
Go to Start/Settings/Control Panel.
Then, in that window, open Display.
Then, click on the Settings tab at the top.
Your screen settings will be at the bottom. You can move the slider (Left click and hold down), and move it to whatever you wish.
You can also click on the Advanced button, to see what your Display Adapter is.

Best wishes,
fredg

[siju]

Hi fredg,

My problem is to remove the nagging screen setting menu which keeps popping up in the middle of the screen. Even after pressing the exit button
On the monitor it is not going

[thebriggsdude]

It just may be the contact behind the button is stuck, some are rubber and some are metal contacts and come little buttons with metal contacts. May just be stuck so it always stays on.

[karadeeps]

It is not that button is stuck or something virus or spyware, or w.r.t computer settings.

The problem is with the control IC behind the monitor.
Give your monitor to your good
Computer montior technician to change the control IC. It costed me Rs.700 including service charge and replacement of IC.:) happy monitoring and computing and surfing

[Babul Hossain]

It is not that button is stuck or something virus or spyware, or w.r.t computer settings.

The problem is with the control IC behind the monitor.
Give your monitor to your good
computer montior technician to change the control IC. It costed me Rs.700 including service charge and replacement of IC.:) happy monitoring and computing and surfing

Thank you

[Babul Hossain]

Monitor Samsung Sync Master 551s but my problem is when I on my computer then my monitor screen vertically is narrow so I want adjust but when I click on menu button then its show me a message Control lock on top of the menu and body of the menu Lock so please give me suggestion what I need to do