Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heat pump blows 3 amp fuse
[ 1 Answers ]
Recently we had a bad storm in Florida after the storm I noticed the 3 amp fuse keeps blowing when turning the stat to heat. I have a carrier model FB4C any advice for a novice would be much appreciated.
Heat pump never turns on, handler blows continuous with no heat except with AUX heat
[ 2 Answers ]
10 year old Rheem air handler RHBA-21J8MFCA, 1/3HP, 2.8A. New WeSt Columbia, SC 29170, Model 2HP13L48P-1B, HCFC-22, 4TON. Installed new out of box iN July and AC working splendidly but start-up is "violent" and loud. Installer says I need some sort of "start-up kit". I put off as had planned...
Rudd heat pump work OK in heat mode but not cooling mode
[ 1 Answers ]
Rudd heatpump that use r410 refrigerant pressure OK in heat mode but pressure low in cooling mode
Heat Pump blows 5amp fuse when switching between defrost & back to heat. Them Heat work
[ 3 Answers ]
I have a Carrier Heat Pump System. It’s about 5 years old and has functioned OK until this Christmas Eve. One problem is the condensing unit is not kicking back on after it goes into defrost mode. I found a 5AMP fuse blown in the attic unit and once replaced it functioned. At least for a day or two...
20 yr old Lennox heat pump fan blows constantly in heat mode
[ 5 Answers ]
20 year old Lennox heat pump - outside temps been 30's at night, 40's daytime UPDATE: I went outside and the unit is covered in frost on 3 sides! I've been reading on Google about frosted heat pump units and can't determine how to manually defrost it. Apparently, the auto defrost is not... View more questions Search
|