Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman draft inducer
[ 1 Answers ]
I replaced my old goodman inducer (# B40590-01) and was told it was replaced with (013m00002s). My question is my old motor had two prongs to connect the furnace wires to the motor. I now have those to wires with no way to connect them as the replacement motor has wires already connected to it,,...
Installation Procedures for draft inducer on Goodman
[ 3 Answers ]
My HVAC contractor identified that the draft inducer motor had seized on my Goodman furnace (this after he just replaced the blower motor this past April). I researched the replacement part after he gave me a quote and I would like to avoid his supplier's markup on the replacement motor, and...
Draft inducer troubleshooting
[ 3 Answers ]
I have a 5 yr. old dunkirk xeb3 boiler. This year on starting I noticed a smell of burnt gas coming out from around the draft inducer housing. I checked housing and gasket, both seemed fine. Fan only runs for approx. 5 seconds before ignition, and shuts off right after flame stops. Could this be...
The Power Venter (aka Heat Inducer and Draft Inducer) will not start on Goodman.
[ 8 Answers ]
FURNACE: Made by: Goodman Model #: GMPN080-4 THE POWER VENTER (this is what the Goodman manual calls it but other websites refer to this as the Heat or Draft Inducer): Made by: FASCO Industries 70219565 Type: U218 Volts: 115 RPM3400 Customer Part #: B2833001S
Draft inducer humming
[ 1 Answers ]
The draft inducer on my furnice is stuck or something, it makes a humming noise for an extended period before the heat kicks on. The blower, the heat ignition everything is fine. It also seems like it starts too frequently. View more questions Search
|