Ask Experts Questions for FREE Help !
Ask
    Jdkruse3's Avatar
    Jdkruse3 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 21, 2015, 08:03 AM
    Kenmore Dishwasher
    I have a kenmore dishwasher that will not run. It fills with water and then sits. None of the cycles do anything. I have reset it by shutting the breaker off for a minute, didn't work. I have cleaned the inside of the dishwasher including the filter, didn't work. I need suggestions on what to do next.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 21, 2015, 01:51 PM
    Could be the float switch. It does 2 things, shuts the water off and then signals the control board to start. It will be a little upside down "cup", usually on the front left. Top can come off so see if it is corroded or possibly stuck.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dishwasher [ 1 Answers ]

How do I get the control lock light off

Kenmore dishwasher [ 0 Answers ]

Dishwasher is leaving a white film on my dishes when done

Kenmore Dishwasher [ 0 Answers ]

I have a kenmore dishwasher that makes a lot of noise and the top spray that is fed from the back of the machine appears not to be getting any water. Thanks for the help.

Kenmore dishwasher [ 1 Answers ]

How do I reset a kenmore dishwasher when the green light is blinking

View more questions Search