Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Sp80 heil furnace
[ 0 Answers ]
When my sp80 furnace is running, The burner will go out then immediately relight. What causes this? Thank you
Heil sp80 will not light
[ 0 Answers ]
I have a heil sp80 furnace. The furnace will not light in the gas chamber, I feel like there is no gas there to light. Thermostat calls for heat - combustion fan starts-igniter glows - then nothing other then it keeps trying on its schedule. I changed the smart valve thinking that was it, but it...
Heil SP80 Won't Ignite
[ 11 Answers ]
Last night when I went to bed the furnace was working fine. The power flickered on and off all night, and at 5 am I woke up freezing my butt off. It was 52 degrees in my house. I can hear it the furnace running, but it is not blowing any heat through the vents in my house, nor is it taking in...
Heil sp80 gas settings
[ 4 Answers ]
Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to...
Heil sp80 gas settings
[ 1 Answers ]
Good Day: Our furnace is a Heil SP80 model #NU65100BFB2, 100K BTU output, converted to LP gas. The main gas valve failed (Honeywell SV9500M 2682, converted, dead solenoid) We have just put in a new main gas valve (Honeywell SV9501 M2056), and personally put in the gas conversion from NG to... View more questions Search
|