Ask Experts Questions for FREE Help !
Ask
    Cossy's Avatar
    Cossy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 29, 2015, 03:21 AM
    New lever sink mixer tap problem
    I have recently had new lever mixer taps installed on my bathroom sink and when the taps are turned off a small spurt of water still comes out - this can happen after a couple of seconds or up to 2 minutes later. - what could be the problem ?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Sep 29, 2015, 06:30 AM
    Remove and clean aerator.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hansgrohe Focus sink mixer tap problem [ 1 Answers ]

How do I get at the cold ceramic cartridge on this tap to replace it? Do I need to take the tap off the sink or can I get at it in position on the sink? Cheers to anyone with the answer!

Problem with new mixer tap [ 2 Answers ]

Put a new mixer tap in bathroom bath now no hot water running only cold water Can anyone help me please

When I turn my mixer tap on in my bathroom my kitchen tap runs could it need a valve [ 1 Answers ]

When I turn my mixer tap on in my bathroom my kitchen mixer tap runs could it need a valve fitting

Cold water OK in kitchen tap but no hot -mixer tap [ 3 Answers ]

No problems with tap which is a mixer in kitchen, suddenly no hot water but cold water coming out OK. Could this be a build up of lime? And how can I fix it?

Mixer tap and unequal pressure problem [ 1 Answers ]

Hello, I have removed a washbasin with separate hot and cold water taps from an ensuite bathroom in my mother-in-law's bungalow and fitted a new basin with a mixer tap. When I connected everything up and tried the tap I got hot water but no cold. However, the cold water supply pipe got warm...

View more questions Search