Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water flow to multiple fixtures
[ 3 Answers ]
I just purchased a home built in the 1950's. I'm having issues with water flow, if using the shower and the sink is turned on or the toilet flushed, I lose almost all pressure. The pipes are copper, but I've noticed that it appears to be 1 main supply to that bathroom. I think that is part of the...
How to convert low flow kitchen faucet to regular flow?
[ 4 Answers ]
I recently had a new kitchen faucet installed. It is a pullout model made by Kohler. I unscrewed the spray spout from the hose and turned on the water. The flow was great and full force, so I know the restricter is in the spray spout, but I didn't see anything in the handle that I could remove...
At start cold air comes out at a good flow ,as the day progresses the flow weakens
[ 6 Answers ]
Central air. At start up the air appears to be functioning well. As the day progresses the air flow from the vents weaken ,unit continues to run unable to cool to set temp.
LDR industries low flow convert to higher flow?
[ 2 Answers ]
Can I convert a low flow valve to a higher flow to fill the large jet tub faster than 20 minutes?
How to increase water flow when multiple fixtures running?
[ 7 Answers ]
Dear Ask Me, I want to increase water flow when multiple fixtures are running. We have a 2900 sq foot two level L-shaped rancher built in 1963 in Atlanta. For our family of four, the water pressure is fine. When someone is taking a shower there is a noticeable drop in pressure and volume when... View more questions Search
|