Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Load calculations
[ 3 Answers ]
I want to add 10 ceiling recessed lighting fixtures rated at 65W each to an existing 15A circuit. In addition to these the circuit will have 7 outlets, ceiling fan with 4 bulb light kit and porch light. The ceiling fan is older so I am going to guess its power consumption at 75W without the bulbs...
Three phase load calculations
[ 0 Answers ]
I have three 1.5 kw AC connected in each of the phase since I have 11 KW three phase supply from electricity board. I want to know how much minimum 3-PHASE power backup I should ask THE SOCIETY to enable me run all the three AC on power back up in case the main power fails.
Latent Heat Load - HVAC Load Calculations
[ 5 Answers ]
Can someone tell whether latent load contributes to the total cooling load of a building or not.if it does, tell which way, and how it should be looked at during load calculation of a building.Also if possible display a perfect, easily understood definition of latent heat.Thanks
Electrical Load Calculations
[ 1 Answers ]
I am trying to determine if the intended load we plan for an office area we are moving into will overload the existing panel. If I add up all the individual loads and divide by three (Three Phase Panel) will I arrive at the load imposed on each phase wire (assuming the loads are balanced on each... View more questions Search
|