Ask Experts Questions for FREE Help !
Ask
    valerie5704's Avatar
    valerie5704 Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 23, 2015, 07:06 AM
    Gluing corian sink overflow drain
    How to glue back corian sink overflow drain
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #2

    Apr 23, 2015, 08:04 AM
    Can you post a picture of your problem? Most overflows are intergreted into the sink when sink is made , so need more info.

    Chuck
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Apr 23, 2015, 08:30 AM
    Use clear silicone, and then wedge in a block of wood to hold the overflow drain in place for 24 hours. That should do it in most cases.

    Mark

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gluing Corian sink overflow drain [ 26 Answers ]

What's the best kind of glue to use to reattach the overflow drain to the underside of a Corian bathroom sink? Gorilla glue didn't work.

How to repair leagage in the overflow connection of corian sink an [ 2 Answers ]

There is water leakage where the overflow hose enters the basin. How to repair and what type of adhesive material is recommended <Email removed>

Corian countertop and sink overflow drain [ 1 Answers ]

My home is under contract and they just completed a home inspection. The inspector filled up the corian sink to the level of the sink overflow drain hole and the solf drain pipe leaked at the connection to the main sink drain. I tried putting a clamp on the connection, however that did not work....

Vanity Staron (like Corian) Overflow drain lines [ 5 Answers ]

We are trying to install a new Staron double bowl lavatory vanity top. We have put in a Moen Asceri faucet with pop up drain. They have included a plastic adaptor for the drain to hook the overflow tube from the sink, and you put it between the sink underside and the tailpiece. It is white plastic...


View more questions Search