Check out some similar questions!
Determine external water tank height to ensure adequete water pressure
[ 3 Answers ]
Hi Am building a farm house which has two levels, level one floor is 5 feet from ground and level two floor is 17 feet from ground. I draw water from a bore well, to ensure adequete water pressure for the 2nd level bathroom shower, how high should the water tank be to ensure adequete pressure in...
How do I determine the height of the ride board
[ 7 Answers ]
Im building a shed 14'x8' how do I determine the height of the ridge board if Im building a 4/12 roof pitch?
Frozen pipe from well pump to tank, tank problem, burned out pump?
[ 0 Answers ]
Help. Frozen pipes have been heated in 50+ degree housing for the last 10 hours. Tank charge reading 36 PSI (bladder tank), pressure gage reading 40 psi, open valve next to gage and no water. Pressure gage was originally reading zero prior to application of direct heat on pipe. Am I looking at a...
What type of pump will work with out a pressurized holding tank for water supply?
[ 3 Answers ]
I want to use a holding tank to supply fresh water for a flush and outside shower at my cottage in a bunk house. Is there a demand pump I can use instead of having a holding tank with a pressure switch? If so what is the pump called?
Determine toilet flange height from drain field
[ 2 Answers ]
I am designing a bath house with mens/womens bathrooms on either side of a shared wall. The perk test specifies that the drain fields must be 23 inches deep (no deeper). The ground is very level. With the above: The elevation of the drain field determines the elevation of the septic... View more questions Search
Add your answer here.
|