Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Recessed Lighting
[ 8 Answers ]
Need help with Recessed Lighting. The included picture is an electrical diagram I used in wiring up some recessed lighting. The switches used are 600w Dimmer Switches with push on/off feature. The problem is that on the center switch the dimming feature burns out consistently but I am still able...
Recessed Range Outlet...
[ 1 Answers ]
Hello Group, & TK!:D I was wondering if I can install a Range outlet by just nailing the outlet between 2 nailers and if I truly need a box, and if I do, what size box should I use, because the standard junction, ceiling, and outlet boxes don't seem to fit on the outlet itself. Any help really...
Recessed lights
[ 3 Answers ]
I am putting can lights in the basement. I can't decied whether or not to put drywall on the ceiling or this new drop ceiling its made of pvc it attaches right to the floor joists and the tiles clip in. you lose 1 inch. The confusing part is how do I put the can in to make up that inch or will the...
Recessed lights
[ 7 Answers ]
Good morning everyone. Started project installing 4 recessed lights in family room. I am running a dedicated circuit just for the lights, composed of 12/2 with ground 20amp breaker And 1 switch My question is the switch is a single pole rated at 15 amp, is this switch safe and OK to use,...
3 lights ran between 2 3-ways, can one of these lights be controlled by a 3rd switch?
[ 2 Answers ]
There are 3 lights connected, 2 in one room and the third at the bottom of the stairs. There is a 3-way at the top of the stairs and another in the room with the 2 lights. This guy would like to also be able to switch off just the 3rd light at the bottom of the stairs. I did not dig into this too... View more questions Search
|