Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Electric furnace fan runs no heat limit switches and heating elements ohmed good
[ 0 Answers ]
York eb10b split system any ideas will be helpful
Furnace fan/blower works-no heat
[ 0 Answers ]
I turned on my furnace yesterday and it worked fine till I went to shut it off. The blower kept running-the only way to turn it off was to flip the breaker switch. Today I tried to turn it back on and the fan runs but no heat. The burners don't seem to kick on or try to ignite. I have a digital...
Furnace works for while then limit switch trips on purge blower
[ 1 Answers ]
Furnace works then limit switch on purge blower trips
Gas Furnace Fan Works But No Heat
[ 0 Answers ]
My gas/electric system (Bryant model 582A) is now 4 years old. It worked fine until Thanksgiving day when it stopped working. When the room temperature is below the pre-set temperature, the system starts to work but only I can hear the fan working with no warm air. A technician came in and...
Gas Furnace / AC unit fan works. Heat/AC do not
[ 2 Answers ]
This winter the furnace control board in my Lennox Gas Furnace / AC unit failed and I had it replaced by a contractor. The contractor mis-wired the thermostat inputs to the board. He wired the Green (fan) wire to the C (compressor connection) board input and the C wire to the Green (fan) board... View more questions Search
|