Ask Experts Questions for FREE Help !
Ask
    snakebitten's Avatar
    snakebitten Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Feb 18, 2015, 11:33 AM
    GE oven JT910SOA3SS will not turn off
    Our GE oven JT910SOA3SS will not turn off. All the touch pads work, except for the clear. To get the oven to off, we need to turn the breaker off. Do I need to replace the Wall Oven Touch Pad and Control Panel Assembly, plus, Control Panel, or just one of them. The oven is 13 years old and the touch pad went out before during warranty. Thanks for all help!
    MWRyland's Avatar
    MWRyland Posts: 24, Reputation: 2
    New Member
    		  
    #2

    Feb 19, 2015, 07:19 AM
    I have a GE profile wall oven that is about the same age. We had a kind of the same problem. What they had to with ours is replace the motherboard located behind the touch pad. I don't think you would need to replace the touch pad.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Feb 19, 2015, 08:49 AM
    Probably not cost efficient to repair a 13 yr old oven. When (if) you can get the parts, disassemble the oven, repair etc. you have approached the cost of a new one. I just had a similar issue with an older GE oven-22 yrs. old. After all pricing, I was able to put a new one in for less than a $250 differential.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    Feb 19, 2015, 11:27 PM
    I found an old manual on that oven: https://dl.dropboxusercontent.com/u/...le%20Ovens.pdf
    And some other manuals: https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    https://dl.dropboxusercontent.com/u/...20Handbook.pdf
    https://dl.dropboxusercontent.com/u/...point_Oven.pdf
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    It depends entirely on what you find wrong in this oven whether it is worth repairing. Ovens have little to go bad in them and if you can repair it there is little that will go out in the next ten years, probably, except an element or two.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My oven makes a high-pitched noise from when I turn it on to when I turn it off. [ 2 Answers ]

AEG double oven. High-pithced noise happens when we turn oven on. Changed the heating element as this was broken. The fan looks fine and working fine. It sounds as if it's coming from the Timer area. Any ideas?

Oven won't turn on (but looks like it is on) [ 1 Answers ]

I have a Frigidaire / Electrolux 'in wall' oven (Model CGEB27S7CB1). When I set it, everything appears OK, but the elements don't turn on (even though it looks like everything is working). Any ideas?

Caloric oven doesn't turn on [ 1 Answers ]

I have a Caloric oven- model EXR243 2D. It'd been working fine but today I can't just turn it on. Please advice of how to fix the problem.

Oven won't turn off [ 1 Answers ]

I have a Frigidaire Gallery oven (model # GLEF378AQE). 20 minutes into baking at 400 it beeped with an F1 fault code. The internal temp was close to 600 and the oven would not turn off. I unplugged it and later plugged it back in. The oven just started to heat up by itself although the oven...

View more questions Search