Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
GMH8 goodman furnace won't stay lit. The furnace lights for about 2 seconds
[ 2 Answers ]
I have a Goodman Furnace GMH8 that is 4 years old and has been working fine but today it will not stay lit. The furnace lights for about 2 seconds and then goes out. The blower comes on and will continue to run as the furnace lights and then goes out several times before shutting off.
Goodman furnace with 3 blinking lights and furnace has flame roll back
[ 7 Answers ]
I have a GMNT-080-4B Some times I get a 3 blink light issue and then when it starts it has a flame roll back. Also I have to change the ignitor every year. Any help would be great
My Goodman GMP050 furnace's igniter won't shut off after the furnace cycles. Why?
[ 0 Answers ]
On my 15 yr old Goodman GMP050, the preigniter stays hot orange even after the furnace cycles properly. I've sanded the flame sensor and the igniter but it still stays on till I shut off the electricity at the furnace. Any thoughts? It's COOOOOOLLLLLLDDDDDDDDD!
Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset
[ 5 Answers ]
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Goodman furnace
[ 1 Answers ]
Have a Goodman Furnace that continues to fail to start up. After some diagnosis on my part I find the incoming vent PVC pipe is clogged with frost. I believe the incoming air is drawing in moisture from the hot air exiting the furnace and then building up frost just inside the pipe opening. I... View more questions Search
|