Ask Experts Questions for FREE Help !
Ask
    techtimdavis's Avatar
    techtimdavis Posts: 103, Reputation: 1
    Junior Member
    		  
    #1

    Nov 17, 2014, 01:52 PM
    I got one of those bissell steam shot steamers, and it has stopped releasing steam.
    My bissell steam shot has stopped releasing steam when I depress the trigger. The unit still heats the water and creats the steam, I just can't get steam to come out the nozzle. I used a paperclip to make sure the nozzle was not clogged, and it's not, so what else could it be?
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
    		  
    #2

    Nov 17, 2014, 02:14 PM
    Call the help line for bissel ? How long have you been using it? I haven't heard bissel name for years, and there are other steam cleaners on the market 'as seen on TV'.

    www.justanswer.com/Bissell‎
    Cat1864's Avatar
    Cat1864 Posts: 8,007, Reputation: 3687
    Marriage Expert
    		  
    #3

    Nov 17, 2014, 02:31 PM
    Bissell suggests trying it without using an attachment. If you get steam then it would be a blocked attachment. If you don't then, then try cleaning the nozzle. If you still aren't getting steam, they suggest calling them. My Steam Shot™ has reduced or no steam. What should I do?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #4

    Nov 18, 2014, 02:56 PM
    That's a simple machine where you should be able to check it with a meter in a few minutes and know what is causing the problem quickly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

If steam produces severe burns, how do people take steam baths? [ 8 Answers ]

Steam at 100 degree celsius produces more severe burns than boiling water at the same temperature. Despite this, people take steam baths without any injuries. How is that? I need this answer for my class IX summer holiday assignment. Please give relevant answers!

How can steam be separated from slurry for steam recovery? [ 0 Answers ]

Steam boiler is returning water via steam pipe rather than through condensate tank [ 0 Answers ]

I have a steam boiler heating system in my home. After steam is produced and goes to the radiators, it is condensating and returning to the boiler via the steam pipe rather than the pipe leading to the condensate tank. It is a two pipe system. The boiler overfills after each cycle and I have to...

What happens if inlet steam temperature increases in a steam turbine? [ 0 Answers ]

What happens if inlet steam temperature increases or decreases the designed temperature in a steam turbine?what is the effect on turbine?

View more questions Search