Ask Experts Questions for FREE Help !
Ask
    ml96v1's Avatar
    ml96v1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 4, 2014, 11:38 AM
    I took off inducer motor mounting bolts but can't pull motor out
    I can't pull out inducer motor for bryant plus 90 furnace. I have mounting bolts off but shaft is holding me mack. How do I get it to release?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 4, 2014, 06:02 PM
    Some inducers are sold only as a unit. You can't replace just the motor without destroying the inducer housing. On others the inducer housing splits in half.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Nov 4, 2014, 06:11 PM
    There is also a squirrel cage blower wheel on the inside of the unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Inducer motor [ 0 Answers ]

The inducer motor/fan runs continuously after the A/C cycles off

What is a inducer motor [ 1 Answers ]

What is a inducer motor

Inducer motor? [ 1 Answers ]

When I turn my thermostat on at first I hear a humming then it blows hot air then cold air. I was told I need an Inducer motor? Does that sound correct?

How much for an inducer motor? [ 1 Answers ]

How much should it cost to replace a goodman inducer motor that is humming?

What is the inducer motor [ 3 Answers ]

I have a bryant 395C gas furnace and the inducer motor assembly is making noise. The motor seems fine and the furnace operates normally, but there is a plastic wheel attached to the end of the motor that is rattling when the motor runs. I've looked at pictures of many inducer motor...

View more questions Search