 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Testing the pressure control switch I found that the ground had 1/2 volt. Just wondering why that would be?
Hi I have recently bought a home with a well system which is new terrain for me.. The line from the pump to the pressure tank has developed an intermittent whistle/high pitched hum that I have narrowed down to the Dole flow control valve. The whistling has gradually become more constant... ...
Will a 3/4 hp submersible pump control box run a 1/2 hp submersible pump?
Our pump turned on and was building pressure, kicked the breaker, and has not restarted. I first changed the breaker, no luck. Then I changed the pressure switch, same result. I'm wondering how to check the control box before spending money on that.
Is there a real link between a power outage and my water well control box being damaged during a power outage? If this could be possible how would it happen? What can I visually check in the Control box to tell if the electrical terminal was damaged?:confused:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
