 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
12 volt halogen to led convergene
I have a number of older Halo 12 volt 50 watt halogen recessed lights. I was going to convert them to led. When I pulled off the trim I only saw the two wires that go to the light(12 volt ac?).I can't get access to the 120 volt ac wires or the transformer. Can I somehow connect the two wires to the led fixture??
|
||||
Check out some similar questions!
I am completeing a motorhome conversion and am wiring a dc 12 volt system via a fuse box. I was hoping to use 1 pmw dimmer switch to power two led bulbs at 5 whatss each. Is this doable?
I have 400 w halogen lamp now, but I think it is not enough environmental protection, what I want to ask is which leds can replace it, this problem bothering me for a long time, I really appreciate if someone tell me.
Is led light supposed to stay on all the time? Mine comes on for 1 second and then goes off (blank) the transformer is powered up (27vac) but control panel and thermostat are dead. Led on controller is out, and thermostat display is blank. Do I have a bad controller? Is there any LED blink for...
Hello All Brothers, we really, really need your help. Our family live without heater almost a week. We both lost our jobs that is why we must wait until today. Here is the problem: Based on the diagnostic codes, 1st LED flashes, 2nd LED is On => Primary or secondary limit switches open. Here...
AC Axial Fan: run on 120 or 230 input volts / Rated Currect .061 or .053 / Input Power 7 or 6 watts. Supply voltae 480. Need a step down transformer / 480 to 120 or 230 volts.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
