Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I had a ceiling fan with a broken pull chain switch. I removed the switch and connect
[ 0 Answers ]
Ceiling fan wiring
Ceiling fan pull chain switch with 6 wires
[ 3 Answers ]
Our ceiling fan switch clicks but the fan does not go on. When I opened the housing, I saw that there was 6 wires, 2 of which were white. One of the white wire was not connected, it could have caused the fan to stop working (?). I do not know where this white wire should be connected to as all...
How do I reconnect the pull chain in my ceiling fan switch?
[ 1 Answers ]
My ceiling fan pull chain broke off inside the switch. It's a Well Tec switch, model e116997. I have my fan motor housing open and I have identified the Well Tec switch... but I can't figure out how to get the remaining brass balls (I think there are 2-3) out, and get the remaining pull chain...
Pull chain switch on ceiling fan w/light
[ 1 Answers ]
At one time a manufacturer made a helper lever to turn on a light on this kind of light but cannot seem to find it. It fitted right on the switch with an extension so it could be pulled on and would retract into the swith with out hanging up. Anyone lknow of this ltype of helper? View more questions Search
|