Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Networking Switch 2 Switch
[ 2 Answers ]
I have 2 buildings I want to network together. They are currently being linked by 2 hubs but I would like to replace them with switches. Is there any known performance issues with linking switches together. (e.g. Bandwidth is less on the uplinked switch) I think I already know the answer but I'd...
New switch
[ 2 Answers ]
HELP I've been to both Lowe's and home depot and no help yet. I'm installing a new switch and two new outlets both outlets to be energized at the same time. I've run three new 14/2 wires into the attic and joined them in a junction box I ran a new wire into an existing hot outlet which has two...
Installing fan and light switch for ceiling fan
[ 9 Answers ]
I am trying to install a switch that controls both the ceiling fan with 3 speeds and a dimmer switch all in one unit for a hunter ceiling fan. At the wall switch there is a black wire which is always hot, a red and a ground. At the ceiling, where I removed a light fixture, there is a black, red,...
Electrical hookup at switch with installing ceiling fan.
[ 1 Answers ]
I've installed the ceiling fan with the light. I need to know what the correct color code connection is for the wall outlet. I have a switch for the fan and a switch for the lights. I also need to know the coding for the switch for the outlet on the other side of the room. How do I wire the...
Limit Switch - Pressure Switch
[ 0 Answers ]
Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The... View more questions Search
|