Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cut floor joist in the basement
[ 2 Answers ]
Hi, I have a question about floor joist. I had a contractor cut 2 inches out of the bottom of about 15 2x8 floor joist, to hide the electrical lines, instead of drilling holes through the middle of the joist. I would assume these would have to be sistered is that right or do have a major problem...
Floor drain in basement slab
[ 4 Answers ]
To provide adequate drainage, what is the recommended distance or code (IRC) for the floor drain to be below the slab surface?
Moving kitchen sink cut up the slab floor cani pour concrete on top
[ 7 Answers ]
I am moving my kitchen sink from one side of the kitchen to the other I located the 3" discharge line which is about 5' from my new sink. I have cut the concrete and i am about put a 3 x 3 x 2 tee and then run my 2" line along and up under the sink to the p trap with a 90. ( I hope this is correct)...
Shower P-trap in a basement with concrete slab floor
[ 6 Answers ]
Hello, The bathroom in the basement has a 2.5" raised floor, the new shower has a very low base (the shower pan is about 1" above the floor). The P-trap I found need about 7.5" vertical clearance. Without rising shower base, what is the best way to make room for th P-trap? If I have to...
Rubberized waterproofing for shower floor
[ 2 Answers ]
Someone painted the shower floor/basin with some type of rubberized waterproofing sealer. We have peeled off most of it but it is stuck in all the grout linesa in the tiles under neath it . We've tried most every cleanser and even a steam cleaner but it won't budge. Does anyone know what I can use... View more questions Search
|