Ask Experts Questions for FREE Help !
Ask
    babyjrsc1973's Avatar
    babyjrsc1973 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 15, 2014, 08:37 AM
    Lennox Blower Motor Wiring
    I'm trying to install a Lennox blower motor into my inside ac unit. I have the motor mounted into the housing. I just need directions on how to install the wiring to the unit. There are two purple wires as well as a green ground. There are also a brown, black, red, yellow, and white.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 15, 2014, 11:52 AM
    How was the old one connected? We have no idea as to how the original was wired but the motor should have a code on it. 2 wires will go to a capacitor, usually brown.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Loud Humming Noise after new blower fan and motor installed in Lennox unit [ 1 Answers ]

I have a G50UH Lennox and the blower fan got wobbly and started thumping and screeching at the end of cycles, so I had a new blower fan, squirrel cage and fan motor installed on Monday. I told the tech it sounded very loud to me and he shrugged and said at least it's not thumping and bumping like...

Blower/Fan motor will not start on it's own Lennox G8 [ 0 Answers ]

My Lennox G8 blower/fan motor sometimes fails to start. When it does this it makes a humming noise. If I bump it or help it by turning the pulley it will start. I was thinking the start capacitor? Am I close maybe? It's a newer motor. Any ideas? Thanks!

Blower motor wiring [ 10 Answers ]

A/c has heat strips. Old motor black wire went blower relay, red to L2. I did as you said, BLACK TO L1, PURPLE TO L2, BROWN to CAPS. (WHAT about blower relay?) Could I have a bad blower relay , possible running on 120 volt when compressor comes on?

Blower Motor (I think) Hum - Lennox Pulse 21 Heating Unit [ 1 Answers ]

Hi - I'm in a new home and turned on the furnace for the first time - a Lennox Pulse 21, fairly new by the looks of it. It was inspected a few weeks ago by the home inspector and passed, but I didn't notice anything at that time. When the unit starts up, and begins blowing heat, there is a...

View more questions Search