Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
GFCI Breaker vs Receptacle
[ 1 Answers ]
I'm adding some 20A circuits in my garage/shop and know that they have to be GFCI protected. My question is this: Is there an advantage to using a GFCI breaker over just putting a GFCI receptacle in the first slot of the series? Thanks.
NES 930 receptacle
[ 1 Answers ]
What is a NES 930 receptacle and what do they use it for. Is it a 4 wire receptacle and if so can the ground and neutral be tied together? I think this is being used in a mobile home. Thanks
GFCI Receptacle
[ 1 Answers ]
Do they make a slimline GFCI Receptacle? I have some very narrow metal eletrical boxes in my kitchen and the regular size GFI will not fit.
Receptacle testers
[ 4 Answers ]
When using a standard receptacle tester on a GFI circuit, I get a Hot/Ground Reverse reading. When I test the same GFI circuit with a GFI Receptacle Tester, I get an Open Neutral reading. The problem was a loose neutral wire . Are these normal readings to expect from the two testers? ...
Receptacle wiring
[ 3 Answers ]
I want to add a receptacle to a box I have in my pantry that has an existing light switch. I have a three wire load coming in to the box from the circuit breaker. The red is wired to the switch and the blacks and whites are connected with wire nuts. The three wires feed other boxes in my kitchen.... View more questions Search
|