Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
4 Lights, 2 separate switches each operating 2 lights, 1 circuit
[ 1 Answers ]
This is the situation we have in our detached garage. We are attempting to run 4 lights on one circuit with 2 separate control switches. (Not 3-way). All wire is 14/2. Power from panel comes in to light #1. Light #2 is fed from light #1. These two lights will be controlled by switch #1. Cable...
Need to separate 3 lights from one switch to two switches
[ 5 Answers ]
I currently have one switch that controls 3 lights (2 exterior and 1 interior). I would like to have the exterior lights on one switch and the interior lights on a separate switch. Inside the switch box, there are 3 electrical lines - 2 with white & black, 1 with red, white and black. All...
I want to wire (all 14 gauge) 2 separate dimmer switches and lights to 1 power source
[ 1 Answers ]
Details: In one dimmer switch box I have one 14 gauge wire . And I have a second 14 gauge wire in that same switch box that runs over to another dimmer (which operates a separate light). I'm trying to give power to both dimmer switches from the white power wire coming in, while having both separate...
Wiring bath fan with light/fan combo. Want to operate them on separate switches.
[ 1 Answers ]
I have power wire with a black/white/ ground. The switches have their own wires with Black/ White wires. The fan unit has two plugs one for the fan with a blue wire and a white wire, and the light has a black wire and a white wire.
How to wire 3 separate lights to 3 separate switches in series circuit
[ 1 Answers ]
I am running wire from the circuit panel to the ceiling in the kitchen, then to a switch, back to the kitchen ceiling light. I am using the same circuit to the same thing for the dining room light with a switch, and a light on my deck also with its own switch. The switch in the dining room and the... View more questions Search
|