Ask Experts Questions for FREE Help !
Ask
    piggrabb88's Avatar
    piggrabb88 Posts: 40, Reputation: 1
    Junior Member
    		  
    #1

    Apr 29, 2014, 06:45 AM
    Troy-bilt blade replace
    My troy-bilt lawn mini tractor has a 30 inch 3 in 1 mulch blade. And I don't like it. I never liked mulch blades, too much lumps. My tractor is model 13cc26jd011. I called troy-bilt and went on one web site to try for an after market blade replacement and neither one can provide a straight cut blade. I think they call that a high lift 2 in 1 blade. Where can I get options to change this blade? My toro works great with a oem toro blade, I tried a mulch blade in that mower one time and lumps again. But in this case my troy-bilt has an oem blade and it sucks. Because it's a mulching blade. Help me save my new lawn tractor its depressing me.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Apr 29, 2014, 09:01 AM
    Find a lawn mower repair shop near you, they can usually find options.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    May 24, 2014, 08:30 AM
    Hi,
    I looked several places and times and find no aftermarket blades to replace this blade. The main reason is that it a 30" blade on a rear-engine rider and therefore has limited sales to people with small yards, usually. To complicate things further, it has the "star" shaped center hole. Most aftermarket blade manufacturers make blades for the 38", 42" and 46" decks with more demand. The newness does not help either. The Troy-Bilt #942-04385 is what I used and I looked at Oregon/Silver Streak, Rotary, Stens and Prime Line.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to change a troy bilt powered push mower blade [ 1 Answers ]

I hit a rock and my three hole blade came off. I don't see any screws.. just the blade.. I am purchasing a new blade but I don't know how to attach it back together.

Troy-bilt PTO blade engage [ 3 Answers ]

I have a Troy-bilt hydrostate, 46"cut 3 blade lawn tractore w/ a PTO blade engagement. Was cutting and the blades stopped. Everything else works fine and there is nothing hanging or loose that I can see. What do I need to look at before I take it to a shop for repair?

Changing the blade on Troy Bilt Self Propelled Lawn Mower Model 12AV566m011 [ 3 Answers ]

Hi, I'm attempting to change the blade on my 2008 Troy Bilt Self Propelled Lawn Mower, Model 12AV566m011. I read online the basics of changing a blade and it seems pretty easy. I don't have the manual. The instructions online say when you replace the blade tighten it to the torque according to the...

Troy-Bilt riding mower blade removal [ 1 Answers ]

I'm trying to remove the blades but the nut on both blades won't budge. I sprayed them both with WD40 but still not happening. I got the mower up on jack stands so that I could at least sharpen the blades but they are in bad shape and still cut rough. I didn't want to try and loosen the nuts while...

View more questions Search