Ask Experts Questions for FREE Help !
Ask
    maeckymaecky's Avatar
    maeckymaecky Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 28, 2014, 01:14 AM
    Adhesive
    An adhesive dealer receives an order for 2920 pounds of an adhesive solution containing 15% polymer by weight. On hand is 493 pounds of 9% solution and very large quantities of 23% solution and pure solvent. Calculate the weight of the pure solvent (in pounds) that must be blended with the rest of the components to fill this order. Use all of the 9% solution.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Apr 28, 2014, 05:16 AM
    Sinc ethis is homework... what do you think the answer is and how did you arrive at it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

CPVC adhesive... what to use? [ 14 Answers ]

The subject states exactly what I want to know... what type of adhesive is best for connecting CPVC? Should I use a all in one (primer/adhesive) or a 2 part (seperate primer and separate adhesive)? Thanks!

Tile adhesive? [ 1 Answers ]

I'm going to install some slate tile over concrete. This is my first try at installing tile. Should I use adhesive or thin set? It will get wet occasionally. I do plan to seal the slate. The floor is flat and smooth, but was painted years ago. What should I do to prep it? Thanks... Gary

Old black adhesive [ 1 Answers ]

I am laying a tile floor over the wood subfloor in a small bathroom. Two layers of some sort of vinyl tiie(from the 40-50s) were under 1.5 x 1.5 tiles, and somewhere in there was some burlap (?). There were some intermittent areas of a black, smooth substance on the wood - smooth, but not soft....

Qu about black adhesive [ 2 Answers ]

Hello! I am a single mom, maintaining a house (yes, with a LOT of duct tape), and many questions. I am wanting to have vinyl flooring laid over an existing floor. I was told by a salesman that because my existing floor tile has black adhesive beneath it, I have a potential asbestos problem. ...

Tiling over adhesive [ 2 Answers ]

I am remodeling my bathroom and want to put 12x12 ceramic tiles on the floor and walls. The plaster walls had old plastic tiles from the 50's. I removed the plastic tiles and now there is a layer of adhesive with trowel marks. For the most part it is fairly even, however, in some spots the...

View more questions Search