Ask Experts Questions for FREE Help !
Ask
    jcurts75's Avatar
    jcurts75 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 21, 2014, 06:48 AM
    Bathroom Lights stopped working
    I have two bathroom light fixtures that stopped working. At first, I thought it was a loose connection, as I pushed up on the light and they both came on. But after I tightened everything, it won't come on at all. I don't think the lightbulbs are bad (would 1 bad stop both fixtures, and the other 5 bulbs to not come on?) We used to notice one of the bulbs would flicker ever so slightly, no matter whether we loosened or tightened the bulb. Any help would be appreciated.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Apr 21, 2014, 08:18 AM
    I have seen a "Arc flash" in one bulb kill six bulbs in a candelabra.

    Start by replacing all the bulbs in one fixture and then the other.
    jcurts75's Avatar
    jcurts75 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 21, 2014, 08:44 AM
    Bulbs are good. Any other ideas?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay fan with lights stopped working [ 1 Answers ]

The fan was running and when I turned the lights on it all stopped working. There is no remote with this model. Any solutions?

Ceiling lights stopped working [ 1 Answers ]

I have six flush mounted ceiling lights in my game room. All of a sudden three of them work and three do not. There is also a ceiling fan in the room which works just fine. I changed all of the bulbs, but no luck. What could cause this?

Remote stopped working, on Ceiling fans w/lights [ 0 Answers ]

We have 2 ceiling fans w/lights and no wall switch, only remotes, I have switched the remotes, changed the codes and still it will only turn off and on intermittently and now not at all. I switch the remotes back. The one in our bedroom works fine w/either remote. The one in the living room has the...

Whirlpool senseason dryer just stopped working no lights or anything [ 0 Answers ]

2 Ceiling Lights stopped working [ 2 Answers ]

Both my upstairs landing light and bedroom light have both stopped working. What ever has caused them to stop also appears to have blown the bulbs. I have changed the bulbs and checked the fuse board (not sure if that's the correct name for it) but all the switches were still on. I turned them off...

View more questions Search